img

Natasha Sinha

Hastelloy C22 Strip Coils have higher durability and are resistant to actively reducing chemicals. These Coils are not used in oxidizing cupric and ferric salt due to their rapid corrosion failure. Hastelloy C22 works under hydrochloric acid, acetic




  • Articles Posted: 3
  • Viewed by : 243

What are the Monel 400 Tubes?

  • 23 Apr 2022
  • 0

Monel is a nickel-copper alloy with iron, manganese, sulfur, and silicon fragments that belongs to the High Nickel Alloys group. The cold working method can help to strengthen it. It offers good resistance to many corrosive conditions and has strong strength and toughness over a wide temperature range. Monel 400 Tube has a minimum yield strength of 240 MPa and a minimum tensile strength of 550 MPa.Applications of Monel 400 TubesMonel 400 tube, also known as Alloy 400, is widely utilized in a range of industries, including the maritime and chemical industries.Sulfuric and hydrofluoric acid alkylation plants also employ it.Typical uses include valve and pump shafts, naval

Read more · 2 min read

What is a hex bolt

  • 03 Mar 2022
  • 0

A hex bolt has a six sided molded head with a machine string that is used close by a nut to shape the nut and bolt blend that is used as a catch in getting a joint on the different sides of a surface. This acts not under any condition like a screw that has a string, yet it turns on its own center point to penetrate the surface and secure it. Stainless Steel 310S Hex Nuts are generally called cap screws and machine bolts. They conventionally have assortments from about ½" to 2 ½" distances across. They shift up

Read more · 3 min read

What is a Heat Exchanger?

  • 28 Feb 2022
  • 0

Put forward clearly, a heat exchanger is a contraption which moves heat beginning with one medium then onto the following, a Hydraulic Oil Cooler or show will dispose of heat from hot oil by using cold water or air. Then again a Swimming Pool Heat Exchanger uses high temp water from a heater or sun controlled heated water circuit to heat the pool water. Heat is moved by conduction through the exchanger materials which separate the mediums being used. A shell and chamber heat exchanger ignores fluids through and tubes, where as an air cooled heat exchanger goes cool air

Read more · 5 min read